|
|
Bharti's Transformer
are manufactured with
standard rating & customer
requirement, Bharti’s
Transformer are designed
& tested as per IS2026. Our
transformers are durable low
capacitive, power saver and
highly official.
|
Product Range of
Distribution &
Power
Transformer: |
 |
Upto 100 KVA,
1-Phase, 11 KV
or below |
|
|
Upto 3000 KVA 11
& 33KV |
|
|
Upto 3000 KVA
OLTC, 33KVOR
Below |
|
|
|
|
Transformer
Design Options: |
|
|
Single Phase /
Three Phase |
|
|
Indoor | Outdoor |
|
|
Pole mounted /
Ground Mounted
|
|
|
Conventional
type /
Hermetical
Fealed type |
|
|
Conventional
Radiator /
Corrugated
Radiator |
|
|
Copper /
Aluminum Wound |
|
|
Fitting
Accessories as
Per Requirement |
|
|
|
Construction: |
|
 1.
Core:
Core is made from best grade
imported cold rolled grain
oriented silicon steel
lamination. Laminations are
cut at an angle of 45 degree
Celsius. Interleaved &
mitered joints reduce the
core losses & magnetizing
current. Core is clamped
with steel channel rigidly
to reduce the cartile sound
level.
2. Winding:
Windings are designed to
optimize dynamic, thermal
Mechanical & Electrical
strives depending upon the
current & voltage
requirement. The coils are
wound with electrolytic
grade high conductivity
annealed wire & stripe
covered with high quality
insulation. Colling ducts
are provided between
windings & oil to minimize
hot spot temperature & temp.
gradient.
3. Insulation & Oil:
Insulation material like pre
compressed board, bakelite,
tube, insulating top,
varnish, epoxy/porcelains
bushing etc are used of best
quality to ensure long life
of transformers.
Oil is used as a coolant
conforms IS 335 is
centrifuged & filtered
before filling into the
transformer to ensure free
from dust & moisture.
4. Tanks & Radiator:
All tanks are assembled by
cold/hot rolled steel plates
through welding. They are
equipped with radiator
corrugated steel sheets in
accordance with capacity.
5. Paint:
Interior & Exterior surface
are cleaned by chemical &
coated with red oxide & 2
final coat of paint outside
of tank body is coated for
better & long life.
6. Temperature Rise:
Designed for maximum temp
rise at full rated load,
40-50 degree Celsius for
Aluminum wound & 45-55
degree Celsius for copper
wound transform. |
|
|
|
After Sales Service:
Every Equipment sold
is backed by our excellent &
prompt service network. Our
organization is well known
by virtue of strong support
in terms of pre sale & after
sales rendered by us during
any solutions. |
|
|
|
|
